Mr. Norm's Performance Parts - Engine
FLOWMASTER DELTA FORCE COLD AIR INTAKE For 2008-2019 CHALLENGER, 2005-2019 Charger & 300
2015 Dodge Challenger Hellcat Headlamp Duct And Cold Air Intake Box
Mr. Norm's Kenne Bell Supercharger for 2008 – 2014 Challengers, Chargers, 300
Mr. Norm's Signature Carbon Fiber Under Hood Accessories
Mr. Norm's Signature Carbon Fiber Strut Covers
Mr. Norm's Signature Carbon Fiber Fuse Box Cover
Mr. Norm's Carbon Fiber Core Supper Filler Panel (Radiator Cover)
Mr. Norm's Signature Carbon Fiber Rocker Covers
Mr. Norm's GSS Billet Aluminum Strut Tower Brace - Fits 2008 – 2023 Challengers*
Mr. Norm's Shock Tower Cover Overlays and Cup Holder Fillers
2015 DODGE CHALLENGER HELLCAT HEADLAMP DUCT AND COLD AIR INTAKE BOX
HELLCAT DNA FOR YOUR CHALLENGER!
Your Racers Net: $ 120.00
EASY INSTALLATION
Installs in a few minutes. Remove the existing air box. Squeeze the three clips on the back of the headlight bezel and push forward to remove the plastic headlight center. Replace the original lower air cleaner box with the Hellcat Lower Air Cleaner Box and connect the Hellcat Cold Air Intake Tube to the opening in the headlight. Replace the original air filter and top and you're ready to go.
YOU CAN HAVE A FUNCTIONAL HELLCAT RAM AIR SYSTEM FOR YOUR CHALLENGER. ORDER YOURS TODAY.
Mr. Norm’s Signature Carbon Fiber Engine Cover
Carbon Fiber Engine Covers are available for the following vehicles equipped with 5.7 Hemi.
2006 - 2019 Dodge Charger R/T
2008 - 2019 Dodge Challenger R/T
2005 - 2008 Dodge Magnum R/T
2005 - 2019 Chrysler 300C
The Mr. Norm's Carbon Fiber Hemi Engine Cover replaces the stock black plastic cover. The Mr. Norm's Carbon Fiber Hemi Engine Cover looks so good it that we not only use it to dress up Hemi engines, we also have one on display in the Mr. Norm's Man Cave. This engine cover begins with an extra heavy 5.7 oz yard of 3K carbon fiber. The carbon is laid into a high temperature gel coated tool. A special high temperature resin system is mixed and added, and stiffeners are inserted in key locations. Separately, lightweight standoffs are molded to accept the OEM rubber grommets. The fully cured and finished cover is then bonded to standoffs using the same adhesive used in bonding aircraft cargo doors.
Your Racers Net: $ 999.95
Note: Mr. Norm's Signature and contrasting Hemi lettering is shown for display purposes only.
Mr. Norm's Carbon Fiber Strut Covers
Mr. Norm's Carbon Fiber Fuse Box Cover
Mr. Norm’s Carbon Fiber Under Hood Accessories
Mr. Norm's Signature Carbon Fiber Strut Covers
Mr. Norm's Signature Carbon Fiber Covers are available for the following vehicles:
2005 - 2014 Chrysler 300 all models
2008 - 2014 Dodge Challenger all models
2005 - 2008 Dodge Magnum all models
2006 - 2014 Dodge Charger all models
Mr. Norm's Carbon Fiber Strut Covers
The Mr. Norm's Signature Carbon Fiber Strut Covers replace the stock covers.
Each carbon fiber strut cover features Mr. Norm’s signature hand painted on the top
Mr. Norm’s Signature Carbon Fiber Strut Covers are the perfect complement to your engine bay
They are easy to install in just a few minutes and no tools are required
Your Racers Net: $ 249.99 per pair
Mr. Norm's Signature Carbon Fiber Fuse Box Cover
Mr. Norm's Signature Carbon Fiber Fuse Box Covers are available for the following vehicles:
2005 - 2014 Chrysler 300 all models
2008 - 2014 Dodge Challenger all models
2005 - 2008 Dodge Magnum all models
2006 - 2014 Dodge Charger all models
Mr. Norm's Carbon Fiber Fuse Box Cover
The Mr. Norm's Signature Carbon Fiber Fuse Box Cover attached on top of the stock cover.
The carbon fiber fuse box cover features Mr. Norm's signature hand painted on the top
Mr. Norm's Signature Carbon Fiber Fuse Box Cover adds detail that will complement to your engine bay
The Mr. Norm's Signature Carbon Fiber Fuse Box Cover is easy to install in just a few minutes and no tools are required
Your Racers Net: $ 169.99
Usually ships in 3 - 7 days
Mr. Norm's Carbon Fiber Core Supper Filler Panel (Radiator Cover)
Mr. Norm's Signature Carbon Fiber Core Support Filler Panel is available for 2008 – 2021 Dodge Challengers All Models
The Mr. Norm's Carbon Fiber Core Support Filler Panel replaces the stock black plastic filler panel
The Mr. Norm's Carbon Fiber Core Support Filler Panel is easy to install in just a few minutes and no tools are required
Your Racers Net: $799.99
Mr. Norm's Signature Carbon Fiber Rocker Covers
Carbon Fiber Rocker Covers are available for the following vehicles equipped with 6.1 Hemi.
2005 - 2010 Chrysler 300C
2008 - 2010 Dodge Challenger R/T
2005 - 2008 Dodge Magnum R/T
2006 - 2010 Dodge Charger R/T
The Mr. Norm's Signature Carbon Fiber Hemi Rocker Covers hide the unsightly coil packs. The Mr. Norm's Signature Carbon Fiber Hemi Rocker Covers looks so good it that we not only use them to dress up Hemi engines, we also have a set on display in the Mr. Norm's Man Cave. These rocker cover begin with an extra heavy 5.7 oz yard of 3K carbon fiber. The carbon is laid into a high temperature gel coated tool. A special high temperature resin system is mixed and added, and stiffeners are inserted in key locations. They are designed to bolt right on to the engine using the factory coil pack fasteners.
Your Racers Net: $ 549.95
Now taking orders for this new product.
Mr. Norm's Signature and the Hemi lettering is hand painted on each rocker cover.
Usually ships in 10 - 14 days
Mr. Norm's GSS Billet Aluminum Strut Tower Brace - Fits 2008 – 2023 Challengers*
Your Racers Net: $ 389.95
Stiffen up your chassis with this award winning high-tech, billet aluminum strut tower brace.
Unique triangulated center brace removes with military spec quick-release pins.
Machined from solid 6061-T6 billet aluminum, this strut tower brace is a great addition to your Challenger's engine compartment.
Easy to install
Note: GSS Chrome 3D Emblem available separately
Made in the U.S.A.
*Fits 2008-11 5.7L w/Engine Cover removed
*Fits 2009-10 3.5L with minor modifications
*Fits 2012 6.4L with minor modification to Variable Intake Cap
*Fits 2012 - 2018 6.4L Hemi with minor modification to Variable Intake Cap
Does Not Fit 2011-13 3.6L V6
Mr. Norm's Shock Tower Cover Overlays and Cup Holder Fillers
Dress up those boring black plastic shock tower covers with these full color Mr. Norm's covers.
They also fit in the "cup holders" on the core support filler panel.
Your Racers Net: $ 29.95 each
Usually ships in 1 - 3 days
 |
 |
 |
 |
 |
 |
 |
 |
 |
Available in the following styles:
- Mr. Norm's Hall of Fame Edition several colors
- Mr. Norm's Grand Spaulding Chicago Logo in Traditional Colors
- Mr. Norm's Special Edition Challenger, Charger, Magnum or 300 Styles
- 2008 - 2015 Dodge Challenger
- 2006 – 2015 Charger
- 2005 – 2015 Chrysler 300
- 2005 – 2008 Dodge Magnum
The Mr. Norm's Shock Tower Cover Overlays and Cup Holder Fillers are easy to install in minutes.
They have pre-applied adhesive on the back and no tools are required.
SHIPPING AND RETURNS
Call 760-612-6365
Monday thru Friday 9:30 AM to 6:00 PM Pacific Time
| Back To Top | Back To Index | Contact Mr Norm |